Learning
Model: 234628
I wanted to use chain instead of fishing line to suspend the clock weights of a ~ 100mm wheel...
4.25€ 5.00€
Ex Tax:4.25€
Model: 234627
Disclaimer
This is a work in progress and iterative testing is done to facilitate the design improvements to get a perfectly working escapement.
Test Results and Revision History
V11 - 7 July 2024
Sadly, the first test attempt(v11) failed, the escapement slips teeth and the cage design (v2) obs..
4.25€ 5.00€
Ex Tax:4.25€
Model: 234636
Battery lid Onewheel XR. Credits to someone in vescify/floattown in discord
The author marked this model as their own original creation...
5.00€
Ex Tax:5.00€
Model: 234634
Onewheel XR plug. Credits to someone in vescify/floattown in discord
The author marked this model as their own original creation...
5.00€
Ex Tax:5.00€
Model: 234626
Classic Clock hands 10mm and 70mm
The author marked this model as their own original creation...
4.25€ 5.00€
Ex Tax:4.25€
Model: 234618
Printing
The crankcase and piston rods are printed with support on build plate.
I printed with PLA+, layer height 0.16 mm.
Dimensions 127 x 78 x 127 mm.
Weight 0.1 kg.
Assembly
- Prepare 6 piston rods with 6 pistons and 6 piston Pins, glueing the piston pins in the piston.
- Glue the Cranks..
20.00€
Ex Tax:20.00€
Model: 234622
Concept Car From 2022 Regulations
The author marked this model as their own original creation...
12.75€ 15.00€
Ex Tax:12.75€
Model: 234623
This is an freestyle designed F1 car. It's not any car of any of the Teams, its not pretty well designed, but I think it looks kinda cool
Its made to glue together
The wheels are made, that you can put the wheels just onto the Suspension, but there is the chance, that you could redo it to put ..
5.00€
Ex Tax:5.00€
Model: 234637
Flight Fins Onewheel XR. Credits to someone in vescify/floattown in discord
The author marked this model as their own original creation...
5.00€
Ex Tax:5.00€
Model: 234633
Funwheel Controller Box Fungineers. Credits to Lia
The author marked this model as their own original creation...
10.00€
Ex Tax:10.00€
%20display%20stand-300x300h.png "Jet Engine (High bypass turbofan) display stand")
Model: 234617
The one in the picture is printed at 0.3LH with a 0.4 nozzle. No support is required...
20.00€
Ex Tax:20.00€